BJLCL - PRIMER COATING, CONDITIONER, WHITE 37875
- MSDS: BJLCL
- Manufacturer: TRIAD PAINT AND CHEMICAL CORP
- Product Name: PRIMER COATING, CONDITIONER, WHITE 37875
- National Stock Number: 8010-00-059-8822
Product Identification
Product ID:PRIMER COATING, CONDITIONER, WHITE 37875
MSDS Date:01/01/1987
FSC:8010
NIIN:00-059-8822
MSDS Number: BJLCL
Responsible Party
BROOKLYN, NY 11207
US
Emergency Phone: 718-443-2778
Info Phone: 718-443-2778
Cage: 33151
Contractor
Cage: 33151
Ingredients
SOLVENTS
Fraction By Weight: 22.65%
ACGIH TLV: 200 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:ANESTHESIA, HEADACHE, NAUSEA,
DIZZINESS, ETC. LIQUID IS MILDLY TO MODERATELY IRRITATING TO EYES.
Effects of Overexposure:ANESTHESIA, HEADACHE, NAUSEA, DIZZINESS, ETC.
LIQUID IS MILDLY TO MODERATELY IRRITATING TO EYES.
First Aid
First Aid:REMOVE VICTIM FROM EXPOSURE AND RESTORE BREATHNG IF
NECESSARY. WASH SKIN WITH SOAP AND WATER. REMOVE CONTAMINATED
CLOTHING. FLUSH EYES WITH COLD WATER FOR AT LEAST 15 MINUTES. GET
MEDICAL ATTENTION IF ANY OF THE ABOVE SITUATIONS WARRANT SUCH
ACTIONS.
Fire Fighting
Flash Point Method:TCC
Flash Point:105 F/41 C
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:EXCLUDE AIR. USE FOAM, CO2, STREAM, WATER FOG, DRY
CHEMICALS.
Fire Fighting Procedures:DO NOT USE WATER. EXCLUDE AIR. CONSULT LOCAL
FIRE MARSHALL.
Unusual Fire/Explosion Hazard:VAPOR FORMS EXPLOSIVE MIXTURE BETWEEN
UPPER & LOWER EXPLOSIVE UNITS.
Accidental Release
Spill Release Procedures:AVOID FLAME AND SPARK SOURCES. PROVIDE
ADEQUATE VENTILATION. REMOVE SPILL WITH INERT ABSORBENT CLOTH AND
NON-SPARKING TOOLS. RETURN TO CONTAINER IF POSSIBLE.
Handling
Handling and Storage Precautions:AVOID OPEN FLAME AND SPARK SOURCES.
PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE HEAT.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
BREATHING OF VAPORS. AVOID PROLONGED OR REPEATED CONTACT WITH SKIN.
Exposure Controls
Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK IF
VENTILATION IS INADEQUATE.
Ventilation:MECHANICAL(GENERAL) WITH APPROVED CLASS D EXPLOSION PROOF
MOTOR AND SWITCHES.
Protective Gloves:SOLVENT RESISTANT GLOVES
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Pres:1 @ 100 F
Vapor Density:5.0
Spec Gravity:1.38
Evaporation Rate & Reference:0.13 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE COLORED LIQUID WITH HYDROCARBON ODOR.
Percent Volatiles by Volume:40.2
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO & CO2 WHEN COMBUSTED.
Disposal
Waste Disposal Methods:ALL DISPOSAL PROCEDURES MUST COMPLY WITH LOCAL,
STATE AND FEDERAL REGULATIONS. OBSERVE ALL PRECAUTIONS AND MEASURES
DESCRIBED IN MSDS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.